Evaluation Of Anti-Icing Polymer Coatings

dc.contributor.authorTepylo, Nick
dc.contributor.authorHuang, Xiao
dc.contributor.authorBudinger, Marc
dc.contributor.authorRouset, Pierrick
dc.contributor.authorPommier-Budinger, Valérie
dc.date.accessioned2018-11-09T20:06:25Z
dc.date.available2018-11-09T20:06:25Z
dc.date.issuedMay-18
dc.description.abstractIce accumulation on aircraft, wind turbines and power lines can have detrimental effects, including efficiency reduction, mechanical failures and the creation of safety hazards. The aim of this study is to investigate the ice adhesion and wear resistance of three hydrophobic and icephobic coatings applied onto an aluminum substrate. Ethylene-tetrafluoroethylene (ETFE) coating was deposited using a plasma spray method while advanced liquid glass (ALG) and silicone R-2180 were both applied using dipping followed by furnace curing. Water was applied and frozen between both bare and coated surfaces using a custom built jig at -20 °C for 24 hours. The ice adhesion strength was measured using a lap shear test done inside an insulated chamber. The results showed low ice adhesion strengths for both ALG and silicone R-2180 coatings when compared to the bare surface. It was also found the silicone R-2180 coating had a higher wear rate than both the ETFE and ALG coatings. By combining icephobic coatings with an ultrasonic de-icing system, the power required by the system can be reduced, creating a low-powered active approach to the de-icing problem.en_US
dc.identifierCSME039
dc.identifier.isbn978-1-77355-023-7
dc.identifier.urihttp://hdl.handle.net/10315/35417
dc.identifier.urihttp://dx.doi.org/10.25071/10315/35417
dc.language.isoenen_US
dc.publisherCSME-SCGMen_US
dc.rightsThe copyright for the paper content remains with the author.
dc.subjectMaterials Technologyen_US
dc.subjectAnti-icingen_US
dc.subjectCoatingsen_US
dc.subjectUltrasonic de-icing systemen_US
dc.subjectIce adhesionen_US
dc.titleEvaluation Of Anti-Icing Polymer Coatingsen_US
dc.typeArticleen_US

Files

Original bundle
Now showing 1 - 1 of 1
Loading...
Thumbnail Image
Name:
CSME2018_paper_39.pdf
Size:
309.82 KB
Format:
Adobe Portable Document Format
Description:
License bundle
Now showing 1 - 1 of 1
No Thumbnail Available
Name:
license.txt
Size:
1.83 KB
Format:
Item-specific license agreed upon to submission
Description: